Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Beverlywood
If you live in Beverlywood and your driveway gate won’t open, sags against the post, or grinds halfway up the track, you need a technician who knows this neighborhood’s gates specifically, not a generalist who shows up and guesses. Most gates in Beverlywood are either original 1940s and 1950s wrought iron or wooden driveway gates on narrow, tight-clearance driveways off streets like Beverwood Drive, Robertson Boulevard, and the interior blocks around Shenandoah Street. We work on your brand, from the motor to the keypad, and we’re close enough to get to your block fast. Call (877) 752-8839 and tell us what your gate is doing. We’ll tell you what it likely is before we ever roll a truck.
Why Gate Repair Hyde Park South Is Beverlywood’s Preferred Gate Repair Company
Beverlywood isn’t a neighborhood where you can slap a universal bracket on an old iron gate and call it done. The original tract gates along the interior streets share the same wrought-iron scroll patterns, and neighbors notice immediately if a repaired gate doesn’t match the block. Our Gate Repair team has rebuilt enough of these period gates to know when a sagging leaf needs a post footing reset versus just a hinge shim. Mitch Calderon built this company around brand-matched repairs, which matters when your Beverlywood gate runs a Viking, Ghost Controls, or Elite operator that a general repair shop has never opened up.
We carry brand-specific parts for the systems Beverlywood homes actually use. That cuts diagnostic time and repeat callbacks. When you’re blocked out of your own driveway at 7 a.m. on a weekday, the last thing you want is a tech who has to order a control board and come back next week.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Commercial Gate Repair in Beverlywood
Commercial Gate Repair in Beverlywood usually means one of two situations: a gated multi-unit property on the neighborhood’s busier edges near Robertson or Pico, or a rear alley access gate on a commercial lot off La Cienega. The job involves diagnosing the operator, testing safety sensors, and checking that the gate closes fully on its own, because a commercial gate that hangs open is a liability, not just an inconvenience. A typical commercial gate service call in Beverlywood runs $150 to $350 for diagnosis and standard mechanical or electrical repair, with full operator replacement ranging $1,800 to $4,500 depending on whether you’re running a Viking, DoorKing, or FAAC system. Every price is quoted and agreed before work starts.
Operator and Access Control Repair
We open the motor housing, check the board for burn marks or capacitor failure, and test the safety loops. Most commercial callouts in this area are control board issues or limit switch failures, not full motor replacements. We replace with the OEM part for the brand on your gate, installed right so the repair call doesn’t come back.
Safety Sensor and Loop Replacement
Photo eyes and induction loops fail quietly. The gate still opens, but it stops detecting vehicles or pedestrians. On commercial gates we test and replace safety edges, photo eyes, and loop detectors as part of the repair. In Beverlywood, where many commercial alley gates back onto active loading areas, this is the repair that keeps you code-compliant.
Iron Gate Repair in Beverlywood
Iron Gate Repair in Beverlywood is less about the metal and more about what the metal is attached to. On a compact lot off Beverwood Drive, our tech traced a badly sagging original wrought-iron swing gate to a rotted hinge post footing rather than the panel itself, reset the post and did the sag correction before re-hanging the leaf. We then matched the block’s scroll pattern with salvaged hardware so the repaired gate read as original to the neighbors. That’s the difference between gate repair and gate replacement in this neighborhood. Iron gate repair here typically runs $200 to $650 for hinge, latch, and realignment work, while welding rusted-through sections or replacing a twisted frame rail runs $400 to $1,200 depending on the scrollwork. All pricing is agreed before we start.
Hinge Post Footing Reset
The number one failure on Beverlywood’s original iron gates is the post footing. Sixty-plus years of seasonal soil expansion and contraction loosens the footing, the post leans, and the gate drags. We dig the footing, reset the post in fresh concrete, and re-hang the leaf to clear the driveway. If the post itself is sound, this is usually a same-day repair.
Scrollwork Match and Welding
Broken scrolls and rusted-through bottom rails are common on the original tract gates. We weld new steel into the damaged section and match the existing scroll pattern where we can, so the repair blends into the block. When a full panel is beyond saving, we cut and replace just that rail or scroll section rather than tearing out the whole gate.
Trusted Brands We Service in Beverlywood
We work on your brand. Most Beverlywood driveway gates run Ghost Controls or Elite openers on the residential side, and Viking or DoorKing on heavier or commercial setups. That matters because a universal workaround on a Ghost Controls swing arm might open the gate, but it’ll shorten the system’s life and fail again in a season or two. We keep OEM parts for these brands in local stock so we’re not waiting on a distributor run when your gate is stuck open. Our technicians are trained specifically on these systems, not learning your model from a YouTube video in your driveway.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Beverlywood Homes
- Wrought-iron swing gates pulling loose at the hinge post footing. The narrow driveways in the 1940s tract leave little room for error, and once the post footing rots or shifts, the leaf drags and binds. We reset the post and do the sag correction rather than just cranking the hinge bolts tighter.
- Wooden driveway gates swelling and dry-cracking with the seasons. Beverlywood’s warm, dry summers pull moisture out of wood gate panels, then the mild rainy winters push it back in. The result is warp, split stiles, and gates that no longer latch. We plane, reinforce, or replace individual boards instead of the whole gate.
- Santa Ana wind events knocking older iron gates out of alignment. The rear alleys in Beverlywood act as wind tunnels during Santa Ana events, and a sustained gust will bend hinge pins or throw a latch out of strike. After big wind events, we see a spike in calls for realignment and latch repair along the alleys.
- Ghost Controls and Elite opener failures from limit switch drift. These residential systems are common in Beverlywood driveways, and their limit switches drift over time, causing the gate to stop short or over-travel. We recalibrate or replace the limit assembly so the gate parks exactly where it should.
Pricing for Gate Repair in Beverlywood, CA
A standard mechanical gate repair in Beverlywood, hinge, latch, or realignment work, runs $150 to $400. If we’re into the operator, diagnostics and minor electrical repair land between $180 and $450. Full operator or control board replacement runs $700 to $2,200 depending on brand. Wooden gate panel repair and reinforcement runs $250 to $700. The biggest price variable in Beverlywood is whether your gate needs a post footing reset, because that means concrete work, not just metal work. We quote the full price before any work starts, and the estimate is free. Call (877) 752-8839 for a number on your specific gate.
We Also Serve Cities Near Beverlywood
Our Gate Repair in Beverlywood coverage extends to the surrounding streets and neighborhoods, including Palms, La Brea, Miracle Mile, and Mid-City. If you’re just outside the 90035 ZIP and your gate is down, call us. We’re close enough that the drive doesn’t add real time or cost to your repair.
Serving Beverlywood, CA – Our Local Coverage Area
We’re based in the Beverlywood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Beverlywood
Because the problem is rarely the hinges themselves. On Beverlywood’s original 1940s and 1950s gates, the hinge post footing is the failure point. The footing rots or loosens over decades of seasonal soil movement, the post leans, and the gate sags. Tightening hinge bolts only pulls the leaf against a post that’s already moving. We reset the post in fresh concrete and then re-hang the leaf, which is the repair that actually lasts. To get a look at your post footing, call (877) 752-8839 and we’ll come out and diagnose it.
Yes, in most cases. Beverlywood’s interior tract gates repeat the same scroll patterns block after block, which means salvaged or matched hardware exists for many of them. We repair the broken section and match the scrollwork rather than replacing the whole gate with a modern panel that stands out. When a full rail is beyond saving, we cut and weld in a matching section. Call us at (877) 752-8839 and describe your gate’s pattern, we’ll tell you honestly what’s salvageable.
Yes. Any automatic gate opener installed on a Beverlywood driveway or rear alley gate must have functioning safety sensors, photo eyes or reversing edges, that detect obstructions and reverse the gate. This is a legal and liability requirement, not an option. If your sensors are missing, bypassed, or misaligned, we’ll bring the gate into compliance as part of the repair. The repair cost for sensor replacement runs $150 to $400 in Beverlywood.
They respond to different weather. Beverlywood’s warm, dry summers pull moisture from wooden gates, so they shrink, crack, and sometimes warp by August. The mild rainy winters then swell the wood, which stresses joints and hardware. Iron gates don’t care about humidity, but they do care about wind. Santa Ana events along the rear alleys bend hinge pins and throw latches out of strike, usually between September and November. So your wooden gate fails in summer and your iron gate fails in fall. We repair both.
For a wide, long-driveway or rear-alley gate in Beverlywood, yes. A wider gate leaf puts more leverage on the operator and the hinge posts, so you need a heavier-duty opener than a standard residential unit, and solar power makes sense where running mains to the gate location is impractical. We size the operator to the actual gate weight and width, not to what’s already in the box. If your gate is over 12 feet wide or solid wood, you’re in a different operator class entirely. Let us know the measurements when you call (877) 752-8839, and we’ll quote it before we touch anything.
Written by Mitch Calderon, Owner at Gate Repair Hyde Park South, serving Beverlywood and the surrounding Westside neighborhoods.