Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Westchester
Electric gate repair in Westchester typically runs $185 – $420 for most motor, control board, and limit switch fixes, with same-week scheduling available for most jobs. We know the gates here, because Westchester has a specific problem most other LA neighborhoods don’t: original 1940s and 1950s posts, hardware, and operators that have been fighting LAX jet-blast dust and marine layer moisture for 70 years. That changes what breaks, and it changes how we fix it. If your gate won’t open or is grinding in Westchester, call Mitch Calderon’s team at (877) 752-8839 and we’ll get it back working.
Why Gate Repair Hyde Park South Is Westchester’s Preferred Electric Gate Repair Company
We built our reputation on the electric side of gate work, not as a fence company that added motors as an afterthought. Gate Repair Hyde Park South technicians are trained and fluent across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Westchester, where we regularly open control boxes to find older LiftMaster and Linear boards that general repair shops won’t touch. We work on your brand, from the motor to the keypad.
Westchester customers keep calling us back because we diagnose the actual cause, not the symptom. A gate that sags and binds near Playa del Rey is often a rotted post footing, not a dead operator. A board that fails intermittently near the LAX flight path is usually corrosion from jet-blast grime and salt air. That local pattern recognition means fewer return visits and a repair that sticks. For a free estimate, call (877) 752-8839.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Commercial Gate Operator in Westchester
Commercial gate operator repair in Westchester involves diagnosing and fixing the motor, control board, loop detector, safety edges, and access system on vehicular and pedestrian gates at apartment buildings, gated communities, and businesses along Sepulveda Boulevard and around LAX. We handle a commercial gate operator from the first diagnostic call through the final safety check, and we quote the full price before any work starts. Commercial gate operator repairs in Westchester typically run $450 – $1,800 depending on whether it’s a relay, a loop detector, or a full operator swap. When an old DoorKing or FAAC unit dies near the airport, we can usually rebuild the control side without tearing out the gate itself.
Access Systems and Safety Hardware
Commercial operators fail differently than residential ones. We regularly see worn safety photocells and embedded loop detectors on Westchester commercial gates that are coated in the grimy film from plane exhaust. If the gate won’t close or won’t hold open, the loop detector is often the first thing we test, not the motor.
When Replacement Beats Repair
Some commercial operators in Westchester installed in the 1990s are now past their useful life. When a control board keeps blowing, or the motor is pulling too many amps, we’ll tell you straight: a new FAAC or DoorKing unit, installed right so the repair call doesn’t come back, is usually the cheaper answer over two years than patching the old one quarterly.
Gate Opener Repair in Westchester
Gate opener repair in Westchester most often comes down to a failed limit switch, a stripped gear, or a control board that has shorted from moisture and jet-blast dust, especially on homes along Manchester Avenue and the 90045 corridor. Residents call us when the gate only opens halfway, won’t respond to the remote, or makes a grinding sound from the slide track. Gate opener repair in Westchester typically costs $185 – $450 for a board, gear, or switch replacement, depending on the brand and whether the parts are stock OEM or require ordering. We quote the exact price before the work begins, so there’s no surprise on the invoice.
Remote, Keypad, and Sensor Failures
Sometimes the opener itself is fine, and the problem is a keypad or remote that lost its programming after a brown-out or a new battery. We reprogram, test, and if the safety photocells have gone weak, we replace them to meet current UL 325 requirements. A safety sensor failure is an entrapment risk, not just an inconvenience, and we treat it that way.
Legacy Openers Near LAX
Homes built in the 1940s and 1950s around Westchester often have original or first-generation operators that were never designed for this much coastal moisture. We service those systems, source compatible parts, and when a new board isn’t available anymore, we retrofit a current LiftMaster or Viking unit onto the existing gate so you don’t lose the original swing or slide hardware.
Trusted Brands We Service in Westchester
We stock and order OEM parts for the brands Westchester actually has: Viking on the newer rebuilds, Ghost Controls on retrofitted driveway gates, DoorKing on the commercial and multi-tenant properties near LAX, and Elite on the heavy slide gates along Sepulveda. Our Electric Gate Repair team works the full system, from the motor to the keypad, with brand-matched diagnostics rather than one-size-fits-all boards. That means we identify the exact part a LiftMaster or Viking system needs on the first visit, which cuts repeat calls. If your gate won’t open in Westchester, call (877) 752-8839 for a free estimate.
Common Electric Gate Repair Problems We See in Westchester Homes
- Rusted hinge posts on original 1940s – 50s gates. Westchester’s earliest homes still have the original wood or steel posts set into concrete footings that have been soaking up marine layer moisture for seven decades. We frequently find the post rotted through at the base, causing the gate to sag and the operator to overwork until it trips or burns out.
- Corroded control boards from jet-blast dust. Planes on approach to LAX drop a fine grimy film over Westchester that settles on horizontal surfaces, including the inside of operator housings. That dust traps the coastal humidity and corrodes board traces, causing intermittent no-opens and ghost starts.
- Swollen wood gates that stick in the marine layer. Wood picket and solid driveway gates near Playa del Rey and the airport absorb moisture at night and swell, then dry and warp during Santa Ana wind events. The seasonal cycle throws off limit settings and strips gears on older operators.
- Failing safety photocells and entrapment protection. Salt-laden air and the LAX film degrade photocell lenses and wiring connections faster here than a few miles inland. We see Westchester gates that refuse to close because a photo eye has gone weak, and that’s a safety issue we fix before it becomes an injury claim or a UL 325 violation.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Westchester, CA
Here’s what Westchester homeowners and property managers can expect to pay. A gate opener repair: $185 – $450. A control board replacement: $260 – $520 depending on brand. A commercial gate operator repair: $450 – $1,800. A full safety system retrofit with new photocells and edge sensors: $350 – $800. A hinge post footing replacement or re-set: $600 – $1,400 if the post is rotted at the base and needs new concrete. The quote is agreed in writing before we begin, and we don’t pad it halfway through the job. Call (877) 752-8839 and we’ll give you a fixed price for your exact gate and brand.
We Also Serve Cities Near Westchester
If you’re in Westchester or the neighboring streets around Westchester, we can usually reach you the same week. Our electric gate repair service covers Playa Vista to the north, Hyde Park South and Morningside Park to the east, and Crenshaw to the southeast. If your gate is down anywhere in that radius, call (877) 752-8839.
Serving Westchester, CA – Our Local Coverage Area
We’re based in the Westchester area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Westchester
Yes, and we do this regularly in Westchester. We add current photocells and safety edges to legacy gates, wired into a modern control board that meets UL 325 entrapment standards, without replacing the whole gate. Whether we can keep the original operator depends on the board’s condition, but in most 90045 homes we retrofit the safety hardware and update the operator only if it’s truly dead. Call (877) 752-8839 and we’ll tell you exactly what’s possible, and what it costs, before any work begins.
Because Westchester sits in the marine layer. At night the onshore moisture from Playa del Rey and the LAX basin condenses on wood gates, swelling the pickets and jambs until the gate binds against its frame. Then a Santa Ana wind event dries everything out and warps the same boards. Homes just five miles inland don’t get that same nightly salt-air soak, which is why Westchester wood gates stick and sag on a cycle we see every spring and fall.
If the gate sags only on one corner and the motor runs fine when disconnected from the gate, the post footing is likely rotted. If the motor hums, trips its breaker, or won’t move the gate even after a manual push, the operator gear or board is the problem. On Westchester’s 1940s and 1950s gates, we almost always check the post first, because that’s the failure we see most. Call (877) 752-8839 and we’ll diagnose it honestly, and quote both fixes if both are needed.
We service all the major brands found in Westchester, including Viking on the new rebuilds, DoorKing on the commercial properties near LAX, LiftMaster and Linear on the older residential gates, plus Ghost Controls, Elite, FAAC, BFT, and Mighty Mule. If you’ve got a brand we didn’t list, call (877) 752-8839 with the model number and we’ll confirm we can get the OEM part before you commit.
Yes, we handle commercial gate operators at apartment complexes, office buildings, and industrial lots along Sepulveda Boulevard and the LAX perimeter, including FAAC and DoorKing systems. Commercial repairs in Westchester typically run $450 – $1,800, and we quote the full price before we touch the gate. Most commercial gate operators can be repaired same-week, and we’ll coordinate access with your property manager. Call (877) 752-8839 for a free estimate.
Contact Gate Repair Hyde Park South for Electric Gate Repair in Westchester
If your gate is stuck, grinding, or refusing to close in Westchester, don’t let it sit. A down gate is a security problem and a daily headache. Call Mitch Calderon’s team at Gate Repair Hyde Park South at (877) 752-8839 for a free estimate, and we’ll get your gate back open today.
Written by Mitch Calderon, Owner at Gate Repair Hyde Park South, serving Westchester and the surrounding LAX-adjacent neighborhoods.