Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Beverlywood, CA
Gate installation in Beverlywood, CA usually means replacing a 60-year-old wrought-iron pedestrian gate or a warped wooden driveway gate with something that matches the block. We’re Gate Repair Hyde Park South, a dedicated gate specialist serving Beverlywood since 2015. We handle the full gate lifecycle: repair, electric repair, and new installation. Whether your original 1940s iron gate has finally given out or you’re upgrading to an automatic driveway system, call (877) 752-8839 for a free estimate. We work on your brand, from the motor to the keypad.
Why Beverlywood Homes Are Different
Beverlywood is a 1940s-50s planned community of single-family homes on compact lots where driveways and rear alleys are the norm. Nearly every property has a street-facing driveway gate or rear alley gate, often original wrought-iron or wood designs now 60+ years old. That makes gate work here a block-by-block, style-matching craft rather than generic new-install work.
The local housing stock is predominantly traditional and ranch-style homes on small, uniform lots. Many still have their original wrought-iron pedestrian gates and wooden driveway gates. Stucco walls and narrow driveways mean any repair or replacement has to match period ironwork and fit tight clearances. You can’t just bolt on a modern gate panel and call it done. The original 1940s tract gates along the interior streets often share the same wrought-iron scroll patterns, so our technicians keep an eye out for matching salvaged hardware. Neighbors notice immediately if a repaired gate doesn’t match the block.
Climate plays a role too. Warm, dry summers and mild, rainy winters in this Westside pocket cause wooden gates to swell, warp, and dry-crack seasonally. Santa Ana wind events strain hinges and latches on older iron gates, loosening mounting bolts and bending catch plates. A gate that worked fine in June can bind by February. Beverlywood’s ZIP code is 90035, and most of the gates we service here have been standing through decades of that seasonal cycle.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Beverlywood Services
Most Beverlywood homeowners call us for one of two things: a gate that’s sagging, stuck, or off its hinges, or an electric gate system that stopped responding. Here’s what each involves locally.
Gate Repair in Beverlywood
We repair what’s already in place: realigning sagging hinges, welding cracked iron scrollwork, replacing rotted wood pickets, and rebuilding latch assemblies. On Beverlywood’s older gates, the challenge is matching the original look. We source salvaged wrought-iron hardware where we can, and we cut wood replacement sections to match the existing profile. If your gate drags on the driveway or won’t latch after a Santa Ana wind event, this is the service. Gate Repair in Beverlywood covers the full scope.
Electric Gate Repair in Beverlywood
Automated gates add motors, control boards, safety sensors, and remotes to the picture, and each of those can fail independently. We diagnose the whole system, from the motor to the keypad. Beverlywood’s older homes often have retrofit openers on gates that weren’t originally designed for automation, which creates clearance and mounting issues. We work with the actual OEM brand on each job. Electric Gate Repair in Beverlywood is our core specialty.
Gate Installation in Beverlywood
Gate installation in Beverlywood means fitting a new gate to a 1940s or 1950s opening without disturbing the period look. Most local homes still have their original driveway and pedestrian gates, and by now many are rusted through, warped beyond repair, or simply too far gone to keep patching. The job is part metalwork, part carpentry, and part matching the block’s original character. We measure the exact post spacing, check how the driveway slopes, and build or order a gate that swings clean and latches tight. See our full Gate Installation service details.
Automatic Gate Installation
Signs you need it
You’re opening and closing your driveway gate by hand multiple times a day, or you want controlled access without leaving the car.
What it costs in Beverlywood
Automatic gate installation in Beverlywood typically runs $4,500 to $12,000 depending on the operator type, gate material, and whether power needs to be run to the gate post.
How we do it
We set the operator mount, run power and low-voltage wiring, install safety edges and photo eyes, then program remotes and keypads to match the system brand you already use.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is sagging beyond hinge adjustment, the wood is splitting through the stiles, or the frame has rusted through at the bottom rail.
What it costs in Beverlywood
Driveway gate installation in Beverlywood typically costs $2,800 to $12,000 depending on whether you choose wood, steel, or wrought iron and whether it’s a single or double gate.
How we do it
We pull the old gate and hardware, set new posts if needed, hang the new gate on adjustable hinges, then align the latch and catch so it closes without slamming.
Sliding Gate Installation
Signs you need it
Your driveway is short or slopes upward from the street, and a swing gate would hit your car or the house when it opens.
What it costs in Beverlywood
Sliding gate installation in Beverlywood typically runs $3,800 to $9,500 including the track, rollers, and motor bracket if you’re automating it.
How we do it
We pour a concrete track pad, set the rail, hang the gate on roller trucks, and adjust the end stops so it glides without binding.
What Gate Installation Costs in Beverlywood
| Item | Typical range in Beverlywood |
|---|---|
| Pedestrian gate (wrought iron, new) | $1,200 – $2,800 |
| Driveway gate (wood, single swing) | $2,800 – $6,500 |
| Automatic gate system (motor, arms, safety) | $4,500 – $12,000 |
How long does gate installation take in Beverlywood?
Most standard driveway gate installations in Beverlywood take one full day on site. Custom wrought-iron work takes longer, usually two to three weeks from measure to install because the metal has to be fabricated off site.
Do I need a permit to replace my gate in Beverlywood?
Replacing a gate on existing posts typically doesn’t require a permit in Beverlywood. New footings for driveway posts or automatic gate operators can trigger a review, so call (877) 752-8839 and we’ll tell you what your specific job needs.
Brands We Service in Beverlywood
We work on your brand. Our technicians are trained on Viking, Ghost Controls, DoorKing, and Elite systems, and we stock brand-matched parts locally so a control board or limit switch doesn’t mean a week of waiting. That’s the difference between a repair that lasts and a universal workaround that fails in six months. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Beverlywood, CA
| Service | Typical range in Beverlywood |
|---|---|
| Gate repair diagnostic visit | $59 – $120 |
| Hinge replacement or re-weld | $250 – $700 |
| Wood gate repair (pickets, rails) | $300 – $900 |
| Wrought iron gate repair and refinish | $750 – $2,000 |
| Electric gate motor replacement | $850 – $2,800 |
| Control board replacement | $450 – $1,800 |
| Safety sensor replacement | $250 – $700 |
| Pedestrian gate installation | $1,200 – $2,800 |
| Driveway gate installation | $2,800 – $12,000 |
| Automatic gate installation | $4,500 – $12,000 |
What pushes price up in Beverlywood is usually the age of the opening. Original 1940s posts may be out of plumb, stucco walls may need patching around new mounts, and matching period ironwork costs more than stock panels. One thing never changes: the price is quoted and agreed before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Beverlywood
We cover all of Beverlywood’s 90035 ZIP code and the blocks immediately around it. Most calls here come from the streets east of Robertson and west of La Cienega, where the original tract gates still stand. Typical response time in Beverlywood is same day for urgent mechanical failures and next day for scheduled work.
- Beverlywood proper
- HOA-gated interior blocks
- Alley-access properties off Cashio Street
- Streets bordering Cheviot Hills
- Blocks near Castle Heights
Service Area – Cities Near Beverlywood
We serve Beverlywood and the surrounding Westside neighborhoods. If you’re in Palms, CA, La Brea, CA, Miracle Mile, CA, or Mid-City, CA, the same team covers your gate work with the same brand-matched parts and upfront pricing.
Serving Beverlywood, CA – Our Local Coverage Area
We’re based in the Beverlywood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Beverlywood
For a gate stuck open, stuck closed, or a motor that won’t respond, we aim for same-day dispatch in Beverlywood’s 90035 ZIP. Call (877) 752-8839 early and we’ll give you a window, not a vague promise.
We know Beverlywood’s original tract character is part of the neighborhood’s identity. We match existing ironwork patterns and wood profiles so replacements don’t trigger HOA complaints or look out of place on the block.
Yes. Most of our Beverlywood repair calls are on gates installed decades before we opened here in 2015. We service every major brand regardless of who did the original work. If it opens, swings, slides, or runs on a motor, we can fix it.
If your Beverlywood gate is sagging, stuck, or simply past its years, call (877) 752-8839. We’ll give you a straight answer, a clear price, and a gate that works. Free estimates, before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Beverlywood Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Justin Park"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Nathan Quinn"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
- Steve Rhodes