Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Hyde Park South, CA
Gate installation in Hyde Park South usually starts between $1,200 and $3,400 for a standard driveway gate, and most jobs wrap up within one to three days once materials arrive. The work here leans heavily toward repairs and replacement on older homes rather than new construction: wrought iron on 1920s bungalows near the historic core, chain-link and wood on rental parcels further south. If you’re weighing a new gate or a full rebuild of an old one, call (877) 752-8839 for a free estimate and a written price before anything gets ordered.
Why Hyde Park South Homes Are Different
Hyde Park South is a dense, block-by-block historic neighborhood running along the Crenshaw corridor and out toward the Hyde Park station on the K Line. Most of the housing stock dates to the 1910s through the 1940s: Craftsman and Spanish bungalows with detached garages set behind long driveways, plus small 1950s and 60s apartment courts. That means the gates we see are original to the property in a lot of cases. Wrought iron driveway gates with rusted hinges, wood pedestrian gates that have warped after decades of hot summers, chain-link on rental parcels where the original gate disappeared years ago.
The climate does specific things here. Long dry summers and Santa Ana wind events bake wood gates until they crack at the joints and pull away from their frames. Marine-layer dampness in winter and rare rains work into old iron and steel at the hinge and latch points, leaving rust that eventually seizes the gate shut or causes the post to fail. And the distinctive issue on older Hyde Park South blocks: gate posts were often set directly into soil or shallow concrete without proper footings. The typical call isn’t a broken latch. It’s a gate that’s leaning badly because the post has settled or rusted through at ground level. We check the post before we quote the repair, because a new hinge on a rotten post is wasted money.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Hyde Park South Services
Most Hyde Park South homeowners reach out for one of two reasons: a gate that won’t open or close properly, or an automated system that’s stopped responding. Here’s what each job involves locally.
Gate Repair in Hyde Park South
This covers mechanical work on swing and sliding gates: sagging hinges, rusted latches, posts that have shifted, wheels that have worn out of round, and gates that drag on the driveway. In Hyde Park South, the age of the hardware is the real variable. A gate from the 1930s may have hinge barrels that are no longer made, which means we either machine a match or convert to a modern hinge with the same look. See the full breakdown on our Gate Repair in Hyde Park South page.
Electric Gate Repair in Hyde Park South
When the motor runs but the gate doesn’t move, or the keypad lights up but the gate ignores it, the problem is in the operator, the control board, a safety sensor, or the power run. We work on LiftMaster, Elite, Mighty Mule, and FAAC systems in Hyde Park South, which means we usually have the right replacement board or sensor in stock rather than waiting on a generic part. Full diagnostic detail is on our Electric Gate Repair in Hyde Park South page.
Gate Installation in Hyde Park South
Gate installation in Hyde Park South typically runs between $1,200 and $3,400 for a driveway gate, with automatic and sliding systems landing at the higher end of that range. Because so many Hyde Park South properties still have their original posts set in shallow or nonexistent footings, a proper installation here usually means pulling the old post, pouring a new concrete footing, and building from there rather than hanging a new gate on a foundation that’s already failing. That’s the difference between a gate that lasts fifteen years and one that’s leaning again next winter. Our Gate Installation service covers the full job from footing to final keypad programming.
Automatic Gate Installation
Signs you need it
The gate still works by hand but you want keypad, remote, or intercom access, or you’re tired of getting out of the car every time you pull into the driveway.
What it costs in Hyde Park South
Automatic gate installation in Hyde Park South generally costs between $2,800 and $4,800 depending on the operator brand and the gate’s weight.
How we do it
We check the existing gate and posts first, pour a new footing if the post is settled, mount the operator and safety sensors, run the low-voltage power, and program your remotes and keypad.
Driveway Gate Installation
Signs you need it
The old gate has rusted through at the hinge, the post is leaning, or the gate drags and no longer closes fully no matter how many times it’s adjusted.
What it costs in Hyde Park South
Driveway gate installation in Hyde Park South typically ranges from $1,400 to $3,200 for a single swing gate, depending on material and width.
How we do it
We remove the old gate and post, set a new post in concrete, hang the new gate on brand-matched hinges, and adjust the latch so it closes cleanly every time.
What Gate Installation Costs in Hyde Park South
| Item | Typical range in Hyde Park South |
|---|---|
| Standard driveway gate (manual, steel or iron) | $1,200 – $3,400 |
| Automatic operator add-on with sensors and keypad | $2,800 – $4,800 |
| Full installation including new post and footing | $2,200 – $3,600 |
Can you install a gate on my existing posts?
If the posts are solid and level, yes. In Hyde Park South we often find posts set directly into soil without concrete, and those need to be pulled and reset first, which adds to the total but prevents a repeat job.
How long does a gate installation take in Hyde Park South?
Most standard installations take one to two days. Custom or automatic gate jobs typically run two to three days once materials are on hand, which usually takes five to seven business days after you approve the written quote.
Brands We Service in Hyde Park South
We stock parts and service four brands commonly found on Hyde Park South gates: Elite, Mighty Mule, LiftMaster, and FAAC. That includes control boards, remotes, sensors, and hinge hardware matched to the original manufacturer rather than universal substitutes. Most repair jobs with common parts are done same day. Browse our brands for the full rundown.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Hyde Park South, CA
| Service | Typical range in Hyde Park South |
|---|---|
| Gate repair (typical job) | $150 – $750 |
| Hinge or latch replacement | $150 – $400 |
| Post reset or reinforcement | $350 – $800 |
| Electric gate diagnostic | $125 – $250 |
| Control board replacement | $350 – $800 |
| Safety sensor replacement or alignment | $150 – $350 |
| Standard driveway gate installation | $1,200 – $3,400 |
| Automatic gate installation | $2,800 – $4,800 |
What pushes a Hyde Park South job toward the top of the range is usually the post. Older posts with no footing, or gates that have been leaning for years, need excavation and fresh concrete before the repair means anything. Always expect a firm quote before you approve the work: the price we quote is the price on the invoice, no surprises after the gate is back in the driveway.
Neighborhoods We Serve in Hyde Park South
We cover all of Hyde Park South, including the blocks north and south of Slauson, the area along Crenshaw Boulevard, and the residential streets running east toward the K Line corridor. Response time is typically same day or next morning for non-emergency calls, depending on parts.
- Hyde Park historic core
- Crenshaw corridor
- Blocks near the Hyde Park K Line station
- Hyde Park South apartment courts
Service Area – Cities Near Hyde Park South
Our trucks also run to neighboring South LA communities with similar housing stock and gate hardware. We cover Baldwin Hills, CA, Leimert Park, CA, Morningside Park, CA, and Jefferson Park, CA. Same-day response depends on location and the parts needed for your specific gate brand.
Serving Hyde Park South, CA – Our Local Coverage Area
We’re based in the Hyde Park South area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hyde Park South
Most repair work and like-for-like replacements on existing gates don’t require a permit in Hyde Park South. New automatic gate installations, especially those with vehicle detection loops or significant post work, may trigger a check with the local building department, and we’ll flag that before any work starts.
For most Hyde Park South calls, yes. We schedule same day or next morning for gate repairs and electric gate diagnostics. Installations and custom jobs are scheduled after a free measure and written quote, since materials and footings take time.
Yes. We handle everything from Mighty Mule driveway gates on single-family homes to FAAC and Elite operators on apartment courts and commercial lots in Hyde Park South, without switching vendors or leaving you to find a separate installer.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Hyde Park South Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Justin Park"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Nathan Quinn"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
- Steve Rhodes