Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across La Brea
Most gate failures across La Brea’s 90036 ZIP come down to tight clearances, aged hardware, and years of sun and sprinkler exposure working against older installations. We repair swing and sliding gates on the compact lots between Wilshire and West 3rd, where a gate that sags even an inch will bind against a neighbor’s stucco wall or drag across the sidewalk. Our techs work on your brand, from LiftMaster and FAAC operators to Mighty Mule and Elite swing systems. For same-week scheduling anywhere in La Brea, call (877) 752-8839.
Why Gate Repair Hyde Park South Is La Brea’s Preferred Gate Repair Company
La Brea homeowners don’t need a handyman who “also does gates.” They need a tech who knows why a 1950s iron driveway gate binds every August and what an old FAAC control board sounds like when it’s about to die. That’s what we do. Our Gate Repair team works exclusively on gates, from the motor to the keypad, and we see more legacy operators in a month across La Brea than most shops see in a year.
We’re led by Mitch Calderon, who built this company around brand-matched repair rather than universal workarounds. When a La Brea customer calls about a grinding Mighty Mule or needs LiftMaster repair in La Brea, we already know the failure patterns for that exact model before we arrive. That cuts diagnosis time and eliminates the repeat service calls that plague generic repair services.
Our service area covers all of La Brea and the surrounding blocks. We stock brand-specific parts for the systems most common here, including hinges and posts sized for the tight clearances these lots demand.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wood Gate Repair in La Brea
Wood gate repair in La Brea is our most requested service, and it’s rarely a simple fix. The 1920s and 1930s Spanish Colonial and Tudor homes along and off La Brea Avenue were built with original wood driveway gates and side gates. Those gates have spent 60 to 100 years under a dry Mediterranean sun. The boards dry, warp, and split. Then the gate starts dragging against the stucco wall or the neighbor’s fence line, which is often less than six inches away.
A typical wood gate repair in La Brea runs $250 to $650. If we’re re-pinning hinges, re-plumbing a post, and replacing a few split boards, expect the lower half of that range. A full rebuild with new stucco anchors and a replacement frame can push toward $700 or more, depending on the gate’s height and how much rot has set in at the base.
Re-Plumbing and Hinge Re-Pinning
Most wood gates here don’t fail because the wood is gone. They fail because the post has drifted out of plumb, or the original hinge pins are worn into ovals. We re-set the post with new footing, re-pin the hinges, and hang the gate square. The gate then clears the adjoining fence the way it did when it was first installed.
Warp and Split Repair
Sun-baked boards cup and pull away from their frame rails. In tight La Brea lots, that warp pushes the gate’s leading edge into the neighbor’s fence. We can often straighten and reinforce with steel backer plates, which keeps the original look without the expense of a full replacement.
Driveway Gate Repair in La Brea
Driveway gate repair in La Brea almost always comes down to clearance. These are narrow 50-foot-wide lots where the driveway sits tight between a stucco wall and the property line. A swing gate that worked fine for 40 years starts dragging after one season of soil settlement or Santa Ana gusts loosening the hinge lag bolts.
Expect driveway gate repair in La Brea to cost $300 to $900. Simple hinge tightening, latch repair, and post adjustment sit at the lower end. A settled post requiring re-plumbing, new concrete, and hardware replacement lands higher. Electric driveway gates with failing motors or boards typically start around $450 and go up from there depending on the brand and whether we’re retrofitting a modern operator.
Sliding Gate Track Repair
Some La Brea lots use sliding gates, particularly on duplex and multi-unit conversions where a swing gate would eat up valuable driveway length. The steel V-track and rollers wear out over time, and the gate starts shuddering and sticking. We replace rollers, repair or replace the track, and realign the gate so it moves quietly.
Electric Driveway Gate Retrofits
Many La Brea driveway gates were hung decades ago with manual hardware. Owners add automation later. When the old operator fails, we don’t force a new gate on you. We’re electric gate specialists and we retrofit modern operators onto the existing iron or wood gate, including safety photocells required by UL 325. That usually saves $1,500 to $3,000 compared to replacing the whole gate.
Trusted Brands We Service in La Brea
We work on your brand. Around La Brea, the most common operators are LiftMaster, FAAC, Mighty Mule, and Elite, and we’re trained on all four plus five more. If your system has an original FAAC board from the 1990s or a Mighty Mule with a dead arm, we carry or can quickly source the OEM replacement parts. That matters on older systems where generic boards don’t match the motor’s logic. Brand-matched repairs last longer and don’t create new faults three weeks later.
Common Gate Repair Problems We See in La Brea Homes
- Sun-warped wood gates binding against stucco walls. The original wood gates on La Brea’s 1920s and 1930s homes dry out under decades of direct sun and then cup or twist. The leading edge starts grinding against the adjoining wall or fence line.
- Rust at the base from sprinkler overspray. Steel gates rust fastest where the lawn sprinklers hit them every morning. That rust seizes the lower hinges and latch hardware, and eventually the gate won’t swing at all.
- Obsolete control boards with no entrapment protection. Legacy operators on older La Brea homes often predate UL 325 safety requirements. They lack photo-eyes and reverse sensors, which is genuinely dangerous on a heavy driveway gate. We replace the board and add proper safety edges or photocells.
- Wind-loosened hinges and latches on tall gates. Santa Ana wind events hit La Brea a few times a year, and tall driveway gates catch that wind like a sail. The repeated gusts work lag bolts loose from the stucco, and the gate starts wobbling and dragging.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in La Brea, CA
What you’ll pay depends on what’s wrong and how old the gate is. Here’s the honest range for La Brea’s market:
- Hinge re-pinning and gate realignment: $250 to $500
- Wood gate repair, including warped board replacement and post adjustment: $250 to $650
- Driveway gate repair with electric operator diagnosis: $450 to $900
- Retrofit of a modern operator onto an existing gate: $900 to $1,800 depending on brand and gate weight
- Control board replacement on legacy systems: $350 to $700 including safety sensor installation
We quote the price before we start, and you approve it before any work begins. No surprise invoices. Call (877) 752-8839 for a free estimate at your La Brea property.
We Also Serve Cities Near La Brea
Our team covers La Brea and the neighborhoods around it daily. If you’re a few blocks over in Miracle Mile, Arlington Heights, Mid-Wilshire, or Beverlywood, we can usually schedule you right alongside our La Brea work without adding a travel surcharge. The lot conditions and gate styles are similar, which means we already know what to expect before we arrive.
Serving La Brea, CA – Our Local Coverage Area
We’re based in the La Brea area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in La Brea
It can usually be fixed. On La Brea’s compact 50-foot lots, a swing gate that drifts even an inch binds against the neighbor’s fence or a mature street tree. The routine fix here is hinge re-pinning and re-plumbing the post, not replacement. That runs $250 to $500 for most gates. Full replacement only makes sense when the wood or iron is structurally rotten or rusted through. Call (877) 752-8839 and we’ll tell you which one you’re looking at after we see the gate.
No. Automatic gate operators in California are required to have entrapment protection under UL 325, which means photo-eyes or a reversing edge. Old boards predating that standard are not compliant, and on a heavy driveway gate, running without them is a safety risk to kids and pedestrians. We replace the board and add proper safety sensors, typically $350 to $700 including hardware. Call (877) 752-8839 for a board inspection.
Yes, and we do it regularly. For La Brea’s older Spanish Colonial and Tudor homes, replacing a working gate just to fit an operator would cost thousands more than necessary. We can retrofit a LiftMaster, FAAC, or Elite operator onto the existing gate, install working safety photocells, and keep your original ironwork. Retrofits run $900 to $1,800 depending on the gate’s weight and the operator you choose. Call (877) 752-8839 for a site assessment.
Tall driveway gates act like a sail when the Santa Anas blow through La Brea. Each gust works the lag bolts loose from the stucco or wood post a fraction of a turn, and after a season or two the gate starts sagging and dragging. The fix is longer bolts with proper anchors, plus re-pinning the hinge barrels and re-setting the post if it’s drifted out of plumb. That typically runs $250 to $500. Call (877) 752-8839 for an exact quote.
Extremely tight. Most La Brea gates sit between abutting stucco walls and shared property lines on compact 50-foot lots, which means there’s often less than a foot of lateral clearance. A gate that swings or slides one inch wrong hits the neighbor’s fence or a mature street tree. That’s why hinge re-pinning and re-plumbing are the most common jobs here, not full replacements. Call (877) 752-8839 and we’ll measure your clearances before recommending anything.
Call for Gate Repair in La Brea
If your La Brea gate is dragging, grinding, or won’t open, call us at (877) 752-8839. We’ll talk through what you’re seeing, quote the repair before we start, and get your gate back open today. No pressure, no upsell, just a straight answer on whether it should be fixed or replaced.
Written by Mitch Calderon, Owner at Gate Repair Hyde Park South, serving La Brea and the surrounding neighborhoods.